Oral liquid filling and capping machine is specially designed for 10-20ml oral liquid straight tube bottle, using glass piston pump volumetric measurement, high filling accuracy, stable performance, low bottle breakage rate, small footprint, using electromagnetic shock capping, centrifugal capping, filling and sealing in one. 10-20ml automatic oral liquid filling and capping machine has three specifications for you to choose, is the majority of pharmaceutical factories, hospitals, health products factories and other industries ideal filling equipment, equipment in accordance with the new GMP standard production.
First, the cylinder piston of the oral liquid small filling machine does not move what to do?
1. Confirm whether the safety emergency stop switch is safe;
2. Confirm whether the air supply switch is open;
3. Confirm whether the one-way signal valve is damaged.
Second, how to deal with the cylinder piston of the oral liquid filling machine does not return after being pushed to the top?
For such a phenomenon, it is necessary to confirm whether the moving target of the filling machine is in contact with the check valve.
Third, the filling amount of the oral liquid small filling machine is not accurate or no material?
1, confirm whether the throttle valve is closed;
2, increase the cylinder pumping speed;
3. Confirm that the tee has useless clamps locked;
4. Confirm whether there is enough material in the storage box;
5. Confirm whether the connection is sealed.
Fourth, how to deal with the material flowing out of the oral liquid filling machine from the back end of the cylinder?
1, check whether the seal ring on the piston is worn, if worn to replace;
2. Confirm whether the piston and piston rod are tight.