Fully automatic capping machine for vials, the capping cutter head is made of steel, the surface is quenched and durable. When working, the capped bottle is fixed, and the three-knife whirlwind knife rotates to cap and seal. The handle of the knife is designed as a spring structure. The distance between the three knives can be fine-tuned. It has strong adaptability and high capping yield. The motor cover is also made of stainless steel. This machine is an ideal choice for hospitals, laboratories, and small pharmaceutical factories.
Features of the vial automatic capping machine: the working procedure is: bottle conveying, cap sorting, cap removal, capping (or capping); frequency conversion speed regulation and photoelectric automatic control system; bottle stacking, bottle shortage can automatically stop, Maintain the coordination of the whole line; cap sorting adopts a large-capacity electromagnetic oscillating bucket feeding device, the cap movement is stable, the sorting effect is good, and the cap feeding efficiency is high.
The specific operation method of the vial automatic capping machine:
1. Put the filled liquid bottle on the bottle feeding machine, and the bottle feeding machine will transport it to the turntable, and the turntable will position the upper cap. At this time, the tray supports the bottle and lifts up until the bottle cap and the capping head are pressed tightly.
2. After the bottle cap and the capping head are pressed tightly, the three capping cutter heads that rotate continuously will rotate the cap tightly for several times.
3. Push the handle forward so that the crimped cap returns to its original position along with the tray. The whole operation process is completed, and the above operation can be repeated every time a cap is crimped.
Daily maintenance of automatic capping machine:
1. Because this filling machine is an automatic machine, the sizes of the pop-up bottles, bottle pads and bottle caps are all required to be uniform.
2. Before driving, you must turn the machine with the crank handle to see if there is any abnormality in its rotation, and you can drive after confirming that it is normal.
3. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large tools or use too much force to dismantle parts to avoid damage to the machine parts or affect the performance of the machine.
4. Whenever the machine is adjusted, be sure to tighten the loose screws. Use the handle to turn the machine to check whether its action meets the requirements before driving.
5. The machine must be kept clean. It is strictly forbidden to have oil, liquid medicine or glass chips on the machine to avoid damage to the machine.