1). Power switch. Generally, there are four places in the air shower room to cut off the power supply:
1. The power switch of the outdoor box of the air shower;
2. The control panel of the air shower indoor cabinet;
3. On the outer box on both sides of the air shower room (the power switch here can prevent the power supply from being cut off in an emergency, and effectively improve the personal safety of the staff). When the power indicator does not work, you may wish to recheck the power supply locations of the above four air showers.
2). When the fan in the air shower is not working. When the air shower is not working, check whether the emergency switch of the outdoor box of the air shower is cut off at the first time. If it is confirmed to be cut off, press it lightly with your hand and rotate it to the right to release it.
3). The fan in the air shower room reverses or the wind speed in the air shower room is very small, please check
4). The air shower room does not blow. In addition to the above three points, it is also necessary to check whether the emergency stop button inside the air shower room box is pressed. If the emergency stop button is red, the air shower room will not blow; To re-press the emergency stop button to work normally.
5). When the air shower cannot automatically sense the blowing, please check the light sensor system in the lower right corner of the air shower room to see if the light sensor device is installed correctly. If the light sensor is opposite and the light sensor is normal, it can be automatically sensed. Blowing.
6). When the wind speed of the air shower room is very low for a period of time, please check whether the initial and high efficiency filters of the air shower room have too much dust. If so, please replace the filter. (The primary filter in the air shower room is generally replaced within 1-6 months, and the high-efficiency filter in the air shower room is generally replaced within 6-12 months)