A significant feature of oral liquid filling machine is a high degree of automation, which can well meet the enterprise's support for production capacity and work efficiency. And in recent years, with the continuous research and development and innovation of automatic filling machine manufacturers, the microcomputer technology has been integrated into the filling machine, and mechanical and electrical integration has been realized. And the filling amount and filling speed can be adjusted and set at will, and the filling accuracy is significantly improved. And the anti-drip filling nozzle also avoids the waste of materials, all of which are needed by modern enterprises, while improving efficiency, it also saves enterprise costs, so this equipment can be seen in major workshops.
People have begun to master and operate it, it accompanies us in our side, "side by side" with us, for enterprises and manufacturers to create considerable benefits, at the same time, for the maintenance of oral liquid filling machine can not be ignored, the following methods will allow you to better maintain the maintenance of this equipment.
The main methods to ensure that the oral liquid filling machine is clean are:
1. Keep the pipeline of the filling machine clean, all pipelines, especially those in indirect or direct contact with the material, should be kept clean, scrub every week, walk the water every day, each time to ensure that the filling machine is clean, and the material tank should be cleaned to ensure that the part in contact with the material can not have dirt and bacteria.
2. In the production process to ensure the biological stability of bottled beverages, we must control the time and temperature to ensure the effect, but also to avoid drying time is too long or the temperature is too high, reduce the oxidation of the beverage, and cool as soon as possible after the end of the temperature does not exceed 35 ° C. Low temperature filling is a low requirement for beverage filling, and under normal circumstances, beverages are not easy to foam in a low temperature environment, which is conducive to filling work.
Before each equipment work, 0 ~ 1℃ of water should be used to reduce the temperature of the filling machine groove and the conveying pipe, and when the filling temperature exceeds 4℃, the temperature should be reduced first before the filling operation. The use of thermal insulation tank, constant temperature irrigation, so that the material in the specified time of filling to maintain a certain constant temperature, to avoid the filling machine due to excessive temperature changes and unstable work. In addition, the filling machine is isolated from other equipment, the lubrication part of the filling machine and the filling material part should prevent cross-contamination, and the soapy water or lubricating oil used for the lubrication of the conveyor belt.